Purchase a new electric furnace induction furnace use and energy saving

Induction furnace has a complete operation control measuring device, can implement automatic control. High thermal efficiency, temperature control accuracy can reach ±1℃, can reach more than 95%.

The size of the medium frequency furnace can be customized, and users can choose their own furnace according to their own needs. The installation of an intermediate frequency furnace is simple. Customers buy new stoves from manufacturers and install them themselves quickly.

There are some tips for the safe operation of intermediate frequency furnaces.

The operator shall be familiar with the performance and structure of the machine, and shall abide by the safety and shift transfer system before the operation is allowed.

More than two people must operate the IF equipment and designate the person in charge of operation.

First check whether the incoming voltage is balanced, the voltage is lower than the specified value, can not start and run.

Start two water pumps for cooling cycle of furnace body and electric control cabinet. Observe whether the outlet of circulating water is smooth, and the reading of the water pressure gauge in the control cabinet should be greater than the specified pressure.

Before sending power carefully check whether there is short circuit between furnace body and capacitor phase. Check that all indicator readings are correct.

Turn the check button to the check file, check whether the reading of each indicator is correct, and listen to the sound of the inverter check board is correct. When all is well, check or put back in the working file.

In the melting process of intermediate frequency furnace, the operator should pay close attention to the furnace, to avoid the “bridge” of the furnace to form a hard shell. Observe the change of the intermediate frequency control voltage of each indicator, must not exceed the safety value at will.

Reducing the power consumption of induction furnace is a very need to solve the problem. Today we will show you some methods.

On the premise of ensuring the normal operation of workers, the production site should keep a smaller space layout as far as possible, which can shorten the connection lines of the production line, reduce the loss caused by current transmission, and complete the energy saving.

When designing the furnace body, we should choose the appropriate furnace body size and induction coil to ensure the smooth flow of current and improve the heating efficiency of induction coil.

Control the temperature of the liquid steel. This requires the operation personnel of the production line to pay attention to the working situation of the induction furnace at any time, find the right time to feed, to assist the mixing of steel and improve the smelting speed of metal. Doing this can be a good way to reduce power consumption.

When preheating the furnace body, turn down the cooling water of the induction ring and keep one-third of the normal water. Keep the water temperature above 55 degrees to facilitate the smooth discharge of steam. This work can shorten the furnace preheating time, but also help us save energy.

That’s it for today. I hope you found it helpful. Welcome to Luoyang Hongteng for more information about induction furnace.

Video of the use process of the furnace