Sales experience: installation of induction furnace

After the user purchases an induction cooker, there may be some problems.

As the main smelting equipment in the foundry industry, the design and manufacture of the induction furnace are the key steps, but after the induction furnace is delivered to the user’s work site, the installation and commissioning are the top priorities for the stable operation of the induction furnace.

Luoyang Hongteng Xiaobian talks about the installation experience of induction furnace.

Preparation before installation of induction furnace

First, check whether the main components of the induction furnace and its installation materials are complete according to the installation list of the induction furnace, and check their condition.

The defects of some parts and materials caused by improper transportation and storage should be repaired, so that all equipment, parts, corresponding materials and parts are intact, so as to ensure the smooth progress of subsequent installation and debugging.

Secondly, check and accept various civil facilities related to the induction furnace, such as checking whether the main dimensions in the layout are correct.

Check whether the foundations, trenches and embedded parts required for the installation of various electrical equipment and main busbars meet the design requirements, and whether the induction furnace foundation, platform elevation, deviation of the vertical axis and horizontal axis, and the position of the anchor screws are within the specified size range. Check whether the construction quality of the foundation and platform meets the requirements.

Only after the above preparations have been completed, the installation of the furnace can be carried out.

Installation of induction furnace

The installation of the induction furnace shall meet the requirements of the drawings.

The first is to install the furnace frame on the basis of the induction furnace, and then install the tilting furnace oil cylinder and furnace body. If there is a weighing device, it should be installed in the specified position according to the requirements of the drawings.

The support of the furnace (for the crucible induction furnace, it includes two parts, a fixed support and a movable support) and the furnace body part, during the processing.

Controlling the thermal deformation caused by welding construction is limited to the specified range of the design, only in this way can the smooth progress of the future work be ensured.

Luoyang Hongtengsheng is a manufacturer specializing in the production of induction furnaces, and we have rich experience. We can also guide you remotely if you need it.

Welcome to follow us to learn more about induction furnaces.

Video of the use process of the furnace