Luoyang HongtengIntermediate frequency induction furnace
The principle of electromagnetic induction heating is that the induced current overcomes the resistance of the conductor itself and produces Joule heat, which is used to heat the metal itself. It is heated and melted to achieve various purposes of hot processing. The induction heating system of melting furnace consists of induction coil, AC power supply and some workpieces. The advantage of electromagnetic induction heating is that the heat is generated in the workpiece itself, the heating method is fast, so the heating rate is high, the process repeatability is good, and the energy saving is relatively. Because of these advantages, medium frequency induction heating has a wide range of applications. There are the following applications: It is used for hot extrusion and hot rolling of billet before forging to complete the diathermy of billet. Used to melt metals, that is, our melting furnace, mainly smelting black, non-ferrous and rare metals; High temperature sintering tungsten, molybdenum and other refractory metals, as well as powder metallurgy. For the smelting of different metals, because of the different density of metals, the volume of the same mass of metals is different. Therefore, the size of the melting furnace body is different, and the...
Induction furnace in the process of use, the temperature and humidity of the surrounding environment also have an impact on it. If the environment exceeds the standard, light will affect the working efficiency of medium frequency furnace, and serious will lead to some fault problems of electric furnace. Today, Red Teng editor will give you an introduction to the working environment suitable for induction furnace. The altitude environment of the equipment should not be too high, preferably below 1000 meters above sea level. The best working environment temperature can be in the range of -10℃~40℃. Under the standard of 25℃, the relative humidity of the surrounding environment should not exceed 90%. There should be no conductive dust, explosive gas or corrosive gas that can seriously damage metal and insulation around the furnace body, so as to avoid equipment damage or personnel injury. The fluctuation of three-phase power supply is not greater than ±5%. If the fluctuation is large, it is easy to cause the electric furnace failure, and there is a certain risk. About the electric furnace at work, melting process of quality control problems, to share with you. Heat preservation of liquid iron: Heat preservation of liquid iron at...
Melting furnaces are available in different sizes. Induction furnaces usually take up less space and are therefore suitable for foundries of all sizes. You will find the induction furnace capacity choice is very large. The foundry requirements you need to guide the size of the induction furnace you purchase. Control characteristics of melting furnace In addition, the ideal induction furnace for sale will have a temperature control feature that allows you to adjust the furnace’s power supply. Metals have different melting points. For example, steel melts at 1370 ℃. Therefore, controlling the power consumed by the induction furnace will help you melt the metal at the proper melting point. This will ensure that you produce a quality product. Before purchasing an induction furnace for sale, ensure that you are satisfied with the control features of the induction melting furnace for sale. Oxidation loss Ideally, a used induction furnace should have a low oxidation rate. This means less waste is produced in the smelting process, which increases productivity. If the oxidation rate of the induction furnace is high, you will not only produce less equipment, but you will also produce a lower quality product. Furnace shell Induction furnace shell must be...
Induction furnace has a complete operation control measuring device, can implement automatic control. High thermal efficiency, temperature control accuracy can reach ±1℃, can reach more than 95%. The size of the medium frequency furnace can be customized, and users can choose their own furnace according to their own needs. The installation of an intermediate frequency furnace is simple. Customers buy new stoves from manufacturers and install them themselves quickly. There are some tips for the safe operation of intermediate frequency furnaces. The operator shall be familiar with the performance and structure of the machine, and shall abide by the safety and shift transfer system before the operation is allowed. More than two people must operate the IF equipment and designate the person in charge of operation. First check whether the incoming voltage is balanced, the voltage is lower than the specified value, can not start and run. Start two water pumps for cooling cycle of furnace body and electric control cabinet. Observe whether the outlet of circulating water is smooth, and the reading of the water pressure gauge in the control cabinet should be greater than the specified pressure. Before sending power carefully check whether there is short circuit between...
Steel is a valuable and useful resource in the manufacture of cars, planes and trains. We really can’t get around without it. However, the tools we use to melt and shape this metal are just as important. Without an induction furnace, the process of melting metal would be difficult. When we use steel, induction heating is an ideal heating method, can be controlled by heating depth and heating time, to meet the surface quenching requirements of the workpiece. Induction heating can be used in the following scenarios: Diathermy: During the heating process, the internal and surface temperatures of the whole workpiece are roughly equal, which is called diathermy. Induction heating for dithermic heating has the advantages of high heating efficiency, fast speed, reduce metal burning loss, easy to control the temperature, to ensure the quality of heating, so it has been more and more widely used. Smelting: When induction furnace is used for smelting, it has these advantages, can provide workers with a better working environment, high heating efficiency, less burning loss of alloying elements in the solution, easy control of the composition, high quality products, especially suitable for melting various high-grade alloy steel. Sintering: Sintering is used in powder...
Medium frequency induction melting furnaces use electromagnetic heating for smelting, which is more efficient. Unlike conventional melting systems, which take a long time to melt the metal, induction furnaces quickly heat up to high temperatures. Induction heating systems can do in a few hours what would normally take days because of their high heating efficiency. The induction system is energy efficient. Induction heating system is not only very efficient in heating, but also very energy saving. Induction furnaces consume less energy than oil furnaces, while maintaining high temperatures. This makes production more cost-effective and the metal produced can be sold at a lower price. Heating capacity produces better results. The heating capacity of induction melting furnaces is considered superior to that of other types of furnaces. Induction heating stoves can heat up to extremely high temperatures, while more traditional stoves struggle to reach those numbers. These high temperatures are what makes induction melting furnaces ideal for melting any type of precious metal. What’s more, the intense heat generated by the induction furnace can be easily controlled by the professional who operates it. Traditional heating furnaces such as oil stoves usually require a lot of effort and sweat to control the...
Induction Steel Melting Furnace
Aluminum Induction Melting Furnace
Stainless Steel Induction Melting Furnace
Medium Frequency Gold Induction Melting Furnace
Small Medium Frequency Induction Furnace
Aluminum/Copper Ingot Continuous Casting Line
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2021 Luoyang Hongteng Electrical Equipment Co., Ltd.
