Luoyang HongtengIntermediate frequency induction furnace
The cooling parts of medium frequency induction furnace equipment mainly include furnace induction coil, capacitor bank, power thyristor frequency converter, etc. 1. The cooling water system for induction coil and capacitor bank The cooling water pressure should be kept at 0.2 ~ 0.3 MPa, the water temperature should be kept at the inlet water temperature of 20 ~ 35 ℃, and the outlet water temperature should be lower than 55 ℃. If the cooling water temperature is too low, condensation will occur, and if the water temperature exceeds 55 ℃, the cooling capacity will be lost. In order to save water, a circulating cooling system is usually used. 2. The cooling system of the SCR frequency converter The cooling water of silicon controlled transistor shall meet the following conditions: the cooling water pressure shall be stably kept at 0.15 MPa, the water quality shall be softened, the hardness shall be less than P8, the resistance shall be above 20k, and the insoluble matter in the water shall be less than 0.03 mg/L. In order to ensure the safe use of medium frequency induction furnace equipment, the cooling water system should implement a centralized water supply and backwater, and the waterway...
Roll the primary performance index of the rolling mill equipment have core strength outstanding wear resistance and operating layer Select roll in addition to the consideration of economy and roll changing match the outage time slot cycle, more important from each unit vehicles pass out different workpiece deformation characteristic product accuracy requirements, choose reasonable inductive performance good roll for different vehicles Rolling mill roughing mill frame priority is reduced section under high temperature, roll in the bearing rolling force is big Large amount of groove deep down, and roll neck should have higher strength Second, due to the roll in the bearing rolling speed is slow, relatively speaking, roll and high-temperature billet touch time is long, so want to have good thermal cracking resistance to fall off The frame selection of alloy steel, semi-steel alloy ductile iron or ferrite ductile iron can meet the requirements In general, the rolling mill in the rolling mill selects the circular pass elliptic system, which mainly bears the task of extending the rolled piece and supplying accurate material type for the finishing mill group. For the whole rolling mill, it has the effect of connecting the upper and lower. The rolling groove of the...
Nowadays, in the age of technology, electronization, and network development, all around us are filled with various electronic devices (such as TV, computer, mobile phone, air conditioner, refrigerators, etc.). Electronic devices produce a certain amount of radiation, but the amount of radiation determines whether it will do harm to the body. Radiation is divided into electromagnetic radiation and nuclear radiation. The radiation in our daily life is mainly electromagnetic radiation. The size of the electromagnetic radiation and electromagnetic equipment with the frequency and power. General frequency in 20-35K, called low frequency; If the frequency is more than 30M, it is called high frequency. Generally, the radiation frequency that can cause harm to the human body should be at the GHz level. So our intermediate frequency heating furnace, intermediate frequency furnace, high-frequency furnace, high-frequency furnace are far below the radiation frequency that can cause harm to the body. So please rest assured this, our daily use of intermediate frequency heating furnace, intermediate frequency electric furnace, high-frequency electric furnace, and other equipment generated radiation is no harm to our body, we can rest assured use.
Hongteng a professional induction furnace manufacturer had developed a mini-type melting furnace for gold melting recently. Compared to the furnace in the market, the Hongteng Medium frequency Induction melting furnace adopts a 3KW-7KW for the 1-3KG melting furnace. With this power configuration, melting time only needs 3-5 mins per batch. Melting speed fast, and electrical inner setting with the higher standard component, Stable function. Easy to operate. Hongteng had designed carton packing and plywood case packing for air delivery and sea delivery. Good for machine protection and machine delivery cost. Welcome, contact us!
1) Durable, beautiful, especially large capacity furnace, need a strong rigid structure, from a safe point of view, furnace tilt, try to use a toughening furnace. 2) By inductive coil by transmitter and shielding function, the leakage flux is reduced, the magnetic lines generated by the silicon steel yoke improve thermal efficiency, increase output, and save energy by about 5%-8%. 3) The existence of a furnace cover reduces the loss of heat and improves the safety of the equipment. 4) Long life, alumina is more serious at high temperature, which leads to metal fatigue and toughness. In the foundry business field, we often see an old broken furnace shell about one-year-old, and the life of toughening furnace using aluminum is much longer than that of aluminum furnace equipment due to less magnetic leakage. 5) Safety performance steel shell furnace is much better than aluminum shell furnace, aluminum shell furnace is easy to deform and has poor safety due to high temperature and high pressure during smelting. Steel shell furnace adopts a hydraulic tipping furnace, which is safe and reliable.
High heating speed, high production efficiency, less oxidation, and decarbonization, saving material and forging die cost. There is no need to worry about the waste of heated billets in coal furnaces due to power outages or equipment failures. Because of the fast heating rate, the oxidation is very small. Compared with the coal-burning furnace, the forgings per ton can save at least 20-50 kg of steel raw materials, and the material utilization ratio can reach 95%. Because the heating method is uniform and the temperature difference of the core surface is very small, the life of the forging die is greatly increased in forging, and the roughness of the forging surface is less than 50 um. Superior working environment, improved working environment and corporate image, pollution-free, low energy consumption. Induction heating its heat in the workpiece itself, so the heating is uniform, the core surface temperature difference is very small. The application of a temperature control system can achieve accurate control of temperature to improve product quality and qualified rate. The induction heating furnace has the advantages of small size, lightweight, high efficiency, excellent thermal processing quality, and a favorable environment. It is a new generation of metal heating equipment.
Induction Steel Melting Furnace
Aluminum Induction Melting Furnace
Stainless Steel Induction Melting Furnace
Medium Frequency Gold Induction Melting Furnace
Small Medium Frequency Induction Furnace
Aluminum/Copper Ingot Continuous Casting Line
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2021 Luoyang Hongteng Electrical Equipment Co., Ltd.
