Luoyang HongtengIntermediate frequency induction furnace
1. Install a plate of steel wire and cover the tank lid,Seal the mouth tank cap with sand, then cover the furnace cover .2. The tank heated up to 870 degrees, about 3 hours, and high temperature for 6
When using an intermediate frequency furnace for smelting, energy can be effectively saved through smaller techniques. For example, when casting, do not empty all molten iron, but leave a proper amoun
The surface quality of continuous casting billet in medium frequency electric furnace is an important factor affecting the qualified rate and production cost. Ensuring good surface quality of continuo
When the steel pipe is heated by induction, the selection of frequency must follow two conditions:1，f≥3000/ d*d 2，0.35b
Hydrogen is a common harmful gas in steel. Its content exceeds the safety content will bring the harmful influence to the steel performance. The harmful effect of hydrogen on steel is mainly manifeste
Due to the limitation of raw materials, high energy consumption and long production cycle, the traditional hot rolling mill has gradually failed to keep pace with the progress and development of the t
Induction Steel Melting Furnace
Aluminum Induction Melting Furnace
Stainless Steel Induction Melting Furnace
Medium Frequency Gold Induction Melting Furnace
Small Medium Frequency Induction Furnace
Aluminum/Copper Ingot Continuous Casting Line
Please fill out the form below (required *), send us a short message, and we will contact you as soon as possible.
Copyright © 2021 Luoyang Hongteng Electrical Equipment Co., Ltd.
